Beach Wheels16in Balloon Wheels – Stainless Wheel Bearings (Set)

SKU: 001-910-2


Replacement balloon wheels for Beach Cart XL. Comes in set of 2.

Hand pump included.

In stock

  • Description
  • Additional information



Balloon wheels with stainless bearings
Designed for easy pushing, pulling and rolling
Hand Pump and two spacers included
Comes in set of two. 

Balloon Wheels Specs

Bushing Hole 20mm (3/4″)
Diameter 16″
Width 8″
PSI 0 PSI recommended;
Always keep below 1 PSI
Weight 9 lbs

Inflation and Maintenance Instructions — Balloon Wheels with Stainless Bearing

Low PSI Recommended

Balloon wheels will build up air pressure with heat by nature. Therefore, you should never inflate your wheels to the maximum air pressure of 3 PSI. Too much air will lead to deformation and overstretching, thus reducing your ballon wheels’ lifespan significantly. For the smoothest rolling effect, always keep your wheels under 1 PSI, and as close to 0 PSI as possible.

Inflating Wheels For the First Time

The wheels come in a square box with no air in them. Use the hand pump to slowly fill the wheels up — an air compressor inflates them too quickly and therefore may damage your brand new balloon wheels. You want to put just enough air to start to round them out. Again, these wheels are designed to stay at a low PSI so they can squat on softer surfaces. The rubber will soften up in warm temperatures. In cold temperatures, they will roll a little stiff, until they warm up.

Maintaining the Wheels When Not Using

When storing your cart in the off-season or when storing the cart, let the air out of your wheels to ensure they are not in a situation where air pressure can increase. Balloon wheels require maintenance, so check the air pressure often. You are using them in the sun and on very hot surfaces, which will cause the air pressure in any style wheel to build. Balloon wheels use a stretchable material, so too much pressure will cause the wheels to stretch and/or deform.

Repairment and Warranty

Do your wheels come with a warranty? No, no one offers a warranty for these balloon wheels. We do cover manufacture defects, typically not holding air. You have 30 days to contact us to see if a wheel is covered, we do not pay shipping for you to send them back to us to inspect or us to send them back to you unless a replacement is needed – in that circumstance we will pay the return shipping.

Additional information

Weight 20 lbs
Dimensions 28 × 15 × 10 in

You may also like…

6 reviews for 16in Balloon Wheels – Stainless Wheel Bearings (Set)

Based on 6 reviews
5 star
4 star
3 star
2 star
1 star
  1. Jeffrey (verified owner)

    Upgraded to these wheels and they worked great. While I can’t say how much better the 16″ works than the standard 12″, I can say that I don’t regret my decision. Airing up the wheels was straightforward and easy too with the supplied hand pump and cardboard template so you know exactly how much air to put into the tires.

    Was this review helpful to you?
  2. Mark Ferrill (verified owner)

    These wheels are a must! So much better than the smaller wheels including the bearings for the loads that I take to the beach for a party of 6 or more.

    Was this review helpful to you?
  3. Scott May (verified owner)

    Awesome upgrade .. Quick response and delivery.

    Was this review helpful to you?
  4. Daniel (verified owner)

    Went with the 16″ balloon wheels in order to turn a hitch rack into a beach cart. Wheels hold the weight of cart and gear and can maneuver soft sand and obstacles. Wish they were less expensive but cannot be happier.

    Was this review helpful to you?
  5. Rob Haynos (verified owner)

    Love it, but haven’t had a chance to use yet. They seem like they are going to work well.

    Was this review helpful to you?
  6. Bridgot G. (verified owner)

    We absolutely love the wheels. They look amazing and the tread makes moving through the sand even easier.

    Was this review helpful to you?
Add a review



Stay In Touch

Subscribe To Newsletter